How to install curtain track

1. Position: When installing the track, it is necessary to do a good job in the overall positioning. Mark the track height of the window, determine the overall position, so as to improve our work efficiency, determine the overall spacing and the size between the tracks.

2. Track: After the overall position is determined, the track can be installed. When the track is installed, the installation method is different according to different types. The width is divided into size. When the width is larger than that, you must master the simplicity of the installation, and the overall length should be appropriate. When installing in the open, install the regulations first, and fix it. When installing in the dark, the track is installed later . After the installation of the track is determined, it is necessary to install the clip to link the clip and the track together.

3. Boom: After installation, the overall fixing parts should be adjusted to determine the overall effect. Install the curtain rod and lifting ring on the fixed track. To determine the overall height, the installed width should be kept at about fifteen centimeters according to the double track calculation.

4. Adjustment: almost the track of the curtain has almost been installed here, and then we need to adjust the overall position. Different forms of curtains are adjusted differently when they are installed. If the curtains that do not pass the window sill are used, the width of the installation should be determined according to the width of the window sill, which must be wider than the window sill.

4. Note: For the installation of the curtain track, the bearing capacity of the wall is very high. If the bearing capacity of the wall is not enough, it will easily affect the overall effect, especially the hollow wall. It is suitable for track installation, which will not only affect the overall wall but also our track.